Name: 1997 Tayana 52
Brand: Tayana
Price: 239000 USD
Availability: InStock

Description

Like most Tayana yachts, this ocean-proven greyhound is available in center or aft cockpit configurations. Side decks are wide and deck space is abundant. Typically sailed as a cutter rig, the Tayana 52 is remarkably seakindly for such a powerful hull and sail plan. Tayana 52's have won major offshore races. In many ways it can be said that the Tayana 52 is the kind of yacht that racing sailors choose to cruise.

Dunigan Marine Group is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Honolulu Yacht Brokerage. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Overview

Robert Perry has written that the Tayana 52 is one of his favorite designs. Blending a low freeboard with a long waterline and a moderate beam, the Tayana 52 appears to be moving even when it's tied to a dock.

Key Specifications

LOA52' 5"

Beam15' 1"

Draft Max6' 6"

LWL42'

TypeSail

Hull MaterialFiberglass

FuelDiesel

Accommodation

Cabins3

Heads2

Tankage

Fuel200 gal

Water200 gal

Registration & Documentation

Reg #TYA52067K797

Engines

Yanmar 4LH-TE S/N 10703Inboard

MakeYanmar

Model4LH-TE S/N 10703

TypeInboard

Fuel TypeDiesel

Power110 HP

Year1997

Hours1,500

LocationMiddle

Drive TypeDirect

Full Details

Overview

Sail Area

IJPE : 1154.00 sq ft

I : 62.00 ft

J : 20.67 ft

P : 57.00 ft

E : 18.00 ft

Working Sail Area : 1156.00 sq ft

Manufacturer Provided Description

CONSTRUCTION

Hand-laminated fiberglass with PVC foam sandwich construction, with net and woven rovings, isophthalic resins. Isophthalic gelcoat on all exterior fiberglass surfaces. A matrix of longitudinal and transverse foam-cored stringers in the lower hull providing maximum hull stiffness. Internal cast iron ballast glassed into a modified fin keel with choice of drafts. Skeg-mounted rudder, with internal stainless steel rudder post and integral stainless steel reinforcement. The deck is of hand lay-up fiberglass construction using end grain light wood sandwich coring. All deck hardware areas are reinforced using encapsulated marine grade plywood. Deck hardware is through-bolted using stainless steel backing plates.

Accommodations

Ascending below from a spacious cockpit you have a double quarter berth to port and to starboard with the galley

fore to port and a head fore to starboard. The main salon has the comfortable and roomy navigation station

opposite the galley with a large dinette immediately forward and directly midship. The settee lies opposite to port.

As you go forward, a large head sits to starboard with a separate shower and the large main cabin encompassing

the area just behind the chain locker.

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Listing MLS by Yachtr.com